Comm-Tec EIB Instrukcja Użytkownika Pobierz pdf (Strona 5)

Select the gateway that has to be changed from the list. Now it is possible to carry out the desired settings

(IP address, communication mode, etc.) in the fields below. Confirm with “Konfiguration setzen” to

transmit the details via the network to the selected device. Afterwards the gateway list is automatically

refreshed und displays the current device settings.

Communication Modes:

TCP Server

In TCP server mode the gateway waits for incoming TCP connections on the set network port. The TCP

connection is only accepted if the IP address of the TCP client matches the setting for permitted IP

addresses / masks.

The TCP connection is maintained until the client terminates the connection. Afterwards a new TCP

connection (even with other clients) can be established.

Password Protection

Activate password protection to prevent unknown users from changing the configuration of the gateways

with the configuration program.

With activated security only unprotected gateways or the correct password can change the gateway. The

password is automatically transmitted to the gateway with “Konfiguration setzen”.

To change or deactivate the password of a protected gateway, you first have to activate the password

protection with the current password within the program, and then the list has to be refreshed. All

protected gateways are marked in the list with a green key icon. Afterwards the password can be changed

or deactivated in the setting window, and the new settings are transmitted to the gateway with

“Konfiguration setzen”.

Permitted IP Addresses

Fill out the fields “Erlaubte IP-Adressen” and “Maske erlaubter IP-Adressen” to permit access to the

gateway only for certain IP addresses. If the address 0.0.0.0 is entered in both fields anyone can connect

to the gateway. Otherwise only those network participants whose IP addresses and masks match the set

values.

1 2 3 4 5 6 7 8 9 10 11 12 13

Brak uwag

Comm-Tec EIB Instrukcja Użytkownika Strona 5